manualshive.com logo in svg

Hanna Instruments HI 902 Color, Быстрый старт

Поделиться
Скачать
Hanna Instruments HI 902 Color Скачать руководство пользователя страница 96

5-40

METHODS

5.5.20

Maximum Titrant Volume

The maximum titrant volume used in the titration must be set according to the analysis.
If the titration end point (fixed or equivalence End Point) is not reached, the titration will be
terminated after the maximum titrant volume has been dispensed. The error message (“Lim-
its Exceeded”) will appear on the display.

Range is from 0.100 to 100.000 mL.

5.5.21

Stirring Speed

The stirring speed can be set between 100 and 2500 RPM with 100 RPM resolution.

The stir speed from the current method is used during the entire titration.

The speed can be adjusted at any time using the 

 and 

 keys when the stirrer is on.

[email protected]

www.ponpe.com

Содержание HI 902 Color

























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды