Hanna Instruments HI 902 Color Скачать руководство пользователя страница 103

Страница: 103 / 248

6-3

TITRATION MODE

6.1

Running a Titration

Before beginning a titration, make sure that the following conditions are met:

• At least one pump is properly installed.

• A burette is inserted in the pump and filled with titrant.

• The aspiration tube is inserted in the titrant bottle and primed. The dispensing tube

is over the titration beaker.

• The standard or sample has been carefully weighed / measured into the titration

beaker.

• The electrode(s) and the temperature probe are inserted in the titration beaker.

• The desired method is selected and the parameters are set to the optimal values.

6.1.1

Starting a Titration

To start a new titration, press

from the main screen.

When a titration begins:

• The stirrer will turn on (if detected and enabled).

• If the pre-stirring time option is enabled, the sample will be stirred until the set

time elapses (see section

5.5.9 Pre-Titration Stir Time).

• If the pre-titration volume option is enabled, the set volume will be dispensed

(see section

5.5.8 Pre-Titration Volume).

• The titrator will start the analysis and continue to deliver titrant until the end point is

detected or the titration is terminated.

6.1.2

Suspending a Titration

While a titration is in progress, you can temporarily stop it by pressing

. The burette

will stop dispensing titrant.

To continue the titration press

6.1.3

Viewing the Titration Curve

During a titration, the potentiometric curve and the derivative curve (equivalence point only)
can be displayed on the

Titration Graph

screen, by pressing

. The titration report ID

is also displayed inside the graph window.

[email protected]

www.ponpe.com

Содержание HI 902 Color

























































































































































































































































Результаты поиска

Содержание HI 902 Color

Отзывы:

Бренды по названию

Популярные бренды

Hanna Instruments HI 902 Color, Быстрый старт

Результаты поиска

Содержание HI 902 Color

Отзывы:

Бренды по названию

Популярные бренды