manualshive.com logo in svg

Hanna Instruments HI 902 Color, Быстрый старт

Поделиться
Скачать
Hanna Instruments HI 902 Color Скачать руководство пользователя страница 152

9-6

MAINTENANCE, PERIPHERALS

Warning: 

Avoid contacting the titrant with bare hands.

Avoid spilling titrant.
Clean the external side of the syringe and piston to remove aggressive chemicals.
Do not touch the Teflon part of the piston or internal walls of the burette with
bare hands or greasy materials.

• Reinsert the piston into the syringe.

• Reinsert the syringe by screwing it in the valve with your fingers.

• Reinsert the protective cap to the bottom of the burette assembly. Carefully position

the cap into the burette.

• Slide the burette into the burette stand. Notice the position of the piston shaft to the

pump couple.

• Priming the burette three times with new titrant is recommended.

[email protected]

www.ponpe.com

Содержание HI 902 Color

























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды