manualshive.com logo in svg

Hanna Instruments HI 902 Color, Быстрый старт

Поделиться
Скачать
Hanna Instruments HI 902 Color Скачать руководство пользователя страница 120

7-14

pH, mV & ISE MODE

In ATC mode, the pH value can be modified by pressing 

.

If the Automatic buffer entry type was selected for the calibration procedure, the
instrument will automatically select the closest buffer to the measured pH value from
the edit buffer group (see section 7.1.2.4 Buffer Group Edit).

If the Semiautomatic buffer entry type was selected for the calibration procedure, the
instrument will automatically select the closest buffers to the measured pH value from
all the available buffers and the buffer value can be selected with 

 or 

.

CALIBRATION MESSAGES:

•

Wrong Buffer. Please check the buffer

: This message appears when the difference

between the pH reading and the value of the selected calibration buffer is significant. If
the message is displayed, check if you have selected the appropriate calibration buffer.

•

Wrong buffer temperature

: This message appears if the buffer temperature is out

of the defined temperature range.

•

Clean the electrode or check the buffer. Press 

 to update calibration

:

This message alerts the user that some dirt or deposits could be on the electrode.

•

Slope too low. Please check the buffer

: This message appears if the current

slope is under 80% or over 110% of default slope. Recalibrate the instrument using
fresh buffers.

•

Slope too high. Press 

 to clear the old calibration

: This message appears

as a result of an erroneous slope condition. Follow displayed instructions.

[email protected]

www.ponpe.com

Содержание HI 902 Color

























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды