manualshive.com logo in svg

Hanna Instruments HI 902 Color, Быстрый старт

Поделиться
Скачать
Hanna Instruments HI 902 Color Скачать руководство пользователя страница 153

9-7

MAINTENANCE, PERIPHERALS

9.1.6

Burette Preparation (Titrant Filling)

Before starting a titration, the burette must be properly filled with titrant in order to obtain an
accurate and repeatable result. To fill the burette, follow the next steps and recommenda-
tions:

• If necessary, clean the burette and make sure it is empty.

• From the main screen press 

.

• Highlight 

Prime Burette option and press 

.

• Enter the number of times the burette needs to be rinsed (minimum three rinses are

recommend allowing air bubbles to be evacuated).

• Press 

.

• Insert the aspiration tube into the titrant bottle only when the piston is going down

and has reached about ¼ from the upper end.

To avoid the presence of the air bubbles inside the burette, make sure to have a continuous
liquid flow inside the burette. A little air just above the liquid level at the first filling is
normal. The next filling will evacuate all of the air; no air will be left in the valve.
Sometimes during this process, slight finger tapping on the tubes is helpful to remove any
residual air bubbles from the tubes.
If air bubbles are still present:

• Remove the aspiration tube from the titrant bottle.

• Repeat burette preparation procedure.

• If no success, clean the burette again.

[email protected]

www.ponpe.com

Содержание HI 902 Color

























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды