Hanna Instruments HI 902 Color Скачать руководство пользователя страница 67

Страница: 67 / 248

5-11

METHODS

To set the dosing volume, select

Linear Dosing and enter the optimum dose.

Dosing volume ranges are:
5 mL burette

0.001 to

4.500 mL

10 mL burette

0.001 to

9.000 mL

25 mL burette

0.005 to

22.500 mL

5.5.5.2

Dynamic Dosing

The titrator determines the titrant dose by trying to maintain a certain potential change

(delta E)

with each addition.
After a titrant dose, if the potential change is lower than the set

delta E, the next dose will be

progressively increased until

max Vol is attained. If the potential change is still lower than the

set value, the titration will continue with the

max Vol doses.

After a titrant dose, if the potential change is higher than the set

delta E, the next dose will be

progressively decreased until

min Vol is attained. If the potential change is still higher than

the set value, the titration will continue with the

min Vol doses.

The titrant is added in volumes

that depend on the proximity of the end point as shown in

the graph below.

[email protected]

www.ponpe.com

Содержание HI 902 Color

























































































































































































































































Результаты поиска

Содержание HI 902 Color

Отзывы:

Бренды по названию

Популярные бренды

Hanna Instruments HI 902 Color, Быстрый старт

Результаты поиска

Содержание HI 902 Color

Отзывы:

Бренды по названию

Популярные бренды