85
7 The use, install and safety rules of attachment
HANGCHA will choose attachment that in accordance with International standard ISO2328
Forklift
pothook fork and installation size of carriage
, such as sideshifters, fork positioner, rotator, push/pull
and coil boom ect.
sideshifter fork positioner rotator push/pull coil boom
bar arm clamp paper roll clamp block clamps load stabilizer turnaload
7.1 Attachment install
–
Without the technical permission of the company, any modification to the safety and
performance of the forklift attachment is strictly prohibited.
–
Actual rating load capacity should be the least of rating load capacity, the load capacity of
attachment, combined load capacity of truck. Generally speaking, the combined load capacity
of truck is the least. Attachment load capacity is just a count value of attachment pressure.
–
The installation and positioning are reasonable, reliable and safe to prevent the attachment
from sliding left and right along the forklift frame during use.
–
After the attachment is mounted, the upper hook stopper should be embedded in the gap of
the upper beam, so that the offset between the centerline of the attachment and the centerline
of the fork frame is less than 50mm, otherwise it will affect the lateral direction of the forklift
stability.
–
To these attachment with rotating function, such as paper roll clamp, bale clamp, muti-purpose
clamp, drum clamp, it needs to weld chock block in the joint of carriage beam and attachment
to prevent move from side to side in the operation.
–
When installing the attachment with the lower hook positioning, the clearance between the
lower hook and the lower beam of the fork carriage should be properly adjusted.
7.2 Attachment use
–
Know well the content of nameplate on attachment, read the instruction manual before usage.
(Especially the manual from attachment company) Operators of forklift attachments should be
trained and qualified.
–
You should fully understand the basic performance and operation methods of the forklift
attachment, especially the allowable load, lifting height, size of the cargo and the adaptable
range of the attachment.