33
1.9 Adjust and replace forks
Adjust fork distance
In order to guarantee safe operation of picking loads, before operation, adjust the fork distance to
proper position according to the tray dimension.
Steps
：
–
Pull up the fork locating pin upward, and
rotate 180° in random direction, then fork is
unlocked.
–
Based on fork carriage center line, adjust the
fork position to both ends symmetrically.
–
After adjusting the fork distance, pull up the
fork locating pin upward, rotate to original
position, and then slide the forks left or right
a little to make sure the fork locating pin get
in the slot of fork carriage.
Fork distance is adjusted.
Caution
⚫
Fork locating pin must be locked (keep in
the slot of fork carriage), otherwise forks
are easy to move during driving and
loads may fall down.
⚫
Be careful when adjusting forks.
Fork removal
Caution
⚫
There is an opening on the lower beam of the fork carriage to assemble and
dissemble forks.
⚫
It’s prohibited to fix forks on the fork carriage opening, prevent forks dropping
from the opening.
⚫
There installs a bolt in the middle of upper beam to prevent forks working here.
Replace in time if bolt is damaged.
Fork disassemble
：
When replacing forks, screw off the fixed bolt in the middle of the fork carriage, move the fork to
1
2
3
