77
Check tire pressure (pneumatic tires only)
Screw down the nut cap in anticlockwise and
measure the tire pressure with pressure gauge.
Add pressure to specified value when
insufficient. After confirming leakage free,
screw the nut cap, check the tire's ground
contact surface and sides for damage, and the
rim for deformation.
Warning
⚫
Forklift tires need high pressure to
support, and slight deformation of
the rim or damage to the ground
surface of the tire will cause an
accident.
⚫
When using the air compressor,
you should firstly adjust the press,
cause the max. output pressure of
the air compressor is higher than
the specified pressure of tire,
otherwise, it may cause severe
accidents.
Tire pressure
(
adopts new standard
GB/T2982-2001
)
Model
Front wheel
Rear wheel
1.5t
~
1.8t
0.79 MPa
1.0 MPa
2.0t
~
3.5t
0.9 MPa
0.8 MPa
4.0t
~
5.0t
1.03 MPa
1.03 MPa
Note
:
The above is the pneumatic tire
pressure, not suitable for solid tires.
Warning
⚫
After assembling tires and rims, all
the bolts and nuts should be
fastened to specified torque valve,
then inflate the tires. Tires have
expanding power after inflation, and
the tire pressure should not exceed
specified value.
⚫
To ensure safety, you should place
the tires in a protective frame or tie
the tires with chain when inflation.
Check wheel fixation
Check whether the tightening torque of the
front and rear wheel nuts meets the
requirements.