52
Daily charging of lithium battery forklift
1. When the power level of the forklift meter shows 1~2 bars of power (that is, the remaining
20%~30%) of power, charge it in time.
2. Turn off the power switch of the forklift truck and press the emergency stop switch.
3. Close the charger main input valve, make sure the emergency stop button bounce, the charger
turns on automatically, the indicator illuminates, and the display screen starts automatically.
4. Remove the charging gun, press the button lock before pulling it out. Check the charging gun,
make sure no water or debris on each port, or metal terminal damaged or influenced by rust or
corrosion.
5. Open the side door, open the rechargeable lithium battery cover. Check the charging socket,
make sure no water or debris on each port, or metal terminal damaged or influenced by rust or
corrosion.
6. Insert the charging gun into the lithium battery socket, the charger self checks and
communicate with the lithium battery, when the entire system is fault-free, in about 15S, the inner
relay attracts, start charging, and the charging indicator illuminates, while the instrument will
display charging voltage, charging current, charging time and charging failure information.
7. The charger will automatically stop charging after fully charged, output voltage and output
current on the meter is 0, press the pause button, and then press charging gun lock and pull the
charging gun out. If it needs stop charging without being fully charged, first press the pause
button, wait until the charge current is reduced to 0A, and then press charging gun lock and pull
the charging gun or plug out.
8. Insert the charging gun to the charger lay-down position, and pull down the charger main input
valve to close it.
9. Close the lithium battery charging cover and the charging door on the truck body. Plug into the
vehicle's electrical outlet and close the cover.
Note: It is forbidden to insert the discharge plug of the battery into the charging socket, otherwise
there is no power supply for the forklift line.
Daily maintenance of lithium battery
Daily
1. Check whether the appearance is deformed, whether the surface is oxidized,
whether the paint is peeled off, whether the installation position is offset, whether
the box is damaged, etc.
Weekly
1. Use a dry cloth or compressed air to clean lithium batteries, chargers.
Monthly
1.Check whether there is water or foreign matter in the plug and socket, and check
whether it is rusted or burnt, etc.
