83
Stacking
─
Slow down when approaching the deposit
location.
─
The vehicle is parked directly in front of the
cargo storage area
─
Check the condition of the storage place.
─
The mast is tilted forward to the level of the
fork, and the fork is raised slightly above
the unloading position.
─
Travel forward, put the load on the
unloading position and then stop.
─
Make sure the loads are right above, drop
the forks slowly until the forks are out of
the load.
─
To perform necessary lifting and tilting
operations, reverse the forklift to remove
the forks from the loads.
─
After confirming that the fork tip has left the
cargo, lower the fork to a position 15cm-
20cm above the ground.
─
The mast is tilted back into place.
Caution
Slow down the forklift in the following
situations
：
⚫
When turning;
⚫
When approaching cargo or pallets;
⚫
When approaching stacked cargo
areas;
⚫
When entering narrow aisles;
⚫
When ground or road is in poor
condition.
Warning
⚫
Do not tilt the mast when the load is
raised above 2m.
⚫
Do not get off or leave the vehicle
when the load is at a high place.
Unloading
─
Slow down when approaching the pick-up
location.
─
Stop when the forklift is 30cm away from
the load.
─
Check the condition of the load.
─
The mast is tilted forward to the level of the
fork, and the fork is raised to the pallet or
rack position.
─
Make sure the fork is aligned with the
