6
To turn on the headlights, front signal lights,
and width lamps, turn the switch to align the
position line on the switch handle with the
corresponding mark on the switch body.
Key switch
[4]
Switch on and off the control current. Remove
the key and make sure that the truck does not
move suddenly.
The key switch has two positions: ON and OFF.
First set the direction lever to the neutral
position, release the accelerator pedal, and
then turn the key clockwise to the ON position.
Caution
⚫
If the direction lever is not in neutral
or the accelerator pedal is depressed,
the forklift will not start when the key
switch is turned to ON.
⚫
At this point a fault code will be
displayed, which is perfectly normal.
⚫
Return the direction lever to the
neutral position and take your foot off
the
accelerator
pedal
before
attempting to start the forklift.
⚫
The fault code will then disappear.
Lift lever [5]
Control the forks’ up or down.
Push
——down; pull——up
Lifting speed can be controlled by tilt
backwards angle of lever and accelerator pedal,
the lowering speed can be controlled by tilt
forwards angle of the lever.
Tilt lever
[6]
It is used for forward and backward tilting of the
mast.
Push
——tilt forward;
Pull
——tilt backward
The tilting speed is controlled by tilting angle of
the lever and accelerator pedal effort.
Caution