H&S 9117, Руководство оператора

Страница: 38 / 56

UNLOADING AUGER EXTENSIONS
3’ Folding Auger Extension
The 3’ folding discharge auger extension kit consists of a 3’ length
of auger which is attached on a pivoting mounting bracket to the
end of the 12’ unloading auger, and a Cradle Extension.
NOTE: The 3’ folding auger extension must be folded back
and locked in position for transport if the tractor cab is an
obstruction.
6’ Folding Auger Extension
The 6’ folding discharge auger extension kit consists of a 6’
length of auger which is attached on a pivoting mounting bracket
to the end of the 12’ unloading auger, and a Cradle Extension.
NOTE: The 6’ folding auger extension must be folded back
and locked in position for transport if the tractor cab is an
obstruction.
OPTIONAL FEATURES & ACCESSORIES
-36-
Model: Digi-Star EZ 2500
An optional factory installed Digi-Star EZ 2500 scale
is available for accurate weight measurement. The
3-point Weighbar System features 3 modes, Net,
Tare and Gross.
Model: Digi-Star EZ 3410 w/External Horn
An optional factory installed Digi-Star EZ 3410 scale is available with all the features of the EZ 2500, plus
an external horn, and has the capability for entering rations.
NOTE:
For operation and troubleshooting refer to the TopCon/Digi-Star user manual
ELECTRONIC SCALES & COMPONENTS
Intake Auger
Optional Hydraulic Drive Intake Augers are available to convey material into the mill. The intake augers
can be swung in and locked against the mixer tank support brace for transporting, or swung out and at
any point. A speed control handle is provided for stopping and starting auger rotation, as well as regulating
the feeding rate of material being fed into the mill hopper shields and screens are in place for your safety.
Do not remove them.