H&S 9117, Руководство оператора

Страница: 23 / 56

GENERAL INFORMATION
Check entire unit carefully before first operation. Tighten bolts and set screws that might have come loose
in shipping. Lubricate as explained in the Lubrication Chapter in this manual.
The Mill is designed to receive dry grain from an auger, process it, and deposit it via the discharge auger.
Be familiar with the machine before starting.
In addition to the design and configuration of equipment, hazard control and accident prevention
are dependent upon the awareness, concern, and prudence of personnel involved in the operation,
transportation, maintenance and storage of equipment or in the use and maintenance of facilities.
It is the responsibility of the owner or operator to read this manual and to train all other operators before
they start working with the machine.
Follow all safety instructions exactly. Safety is everyone’s business. By following recommended procedures,
a safe working environment is provided for the operator, bystanders and the area around the work site.
Untrained operators are not qualified to operate the machine.
Many features incorporated into this machine are the result of suggestions made by customers like you.
Read this manual carefully to learn how to operate the machine safely and efficiently. By following the
operating instructions, in conjunction with a good maintenance program, your Roller Mixer will provide
you with many years of trouble-free service.
NOTE: The following procedures must be done before & during operation;
1.) The hopper shut-off is open.
2.) The tank lid is closed & the collector cover is open.
3.) The unloading auger shut-off door is closed.
4.) Operate the mixer on level ground for uniformity of mix.
5.) Maintain a straight-line alignment between the tractor and mixer to prolong the life of the drive line
components.
6.) Maintain the tractor rated PTO speed to obtain the highest efficiency.
7.) Add supplements after a small amount of feed has been ground, then dry granular materials.
NOTE: Do not grind grains with high moisture content. This may cause plugging. Abnormally damp crops
will not feed or mix well.
When the feed in the top windows begins to drop the 1st time, grinding should be discontinued .
IMPORTANT: Overfilling the mixing tank will place unnecessary stress on the drive line components.
Keep the tank lid closed and latched so that if the tank is accidentally overfilled, the lid can pop open and
release the feed inside the tank.
NOTE: Optional models of electronic scales are available for accurate weight measurements and rations.
Allow the mixer to continue running for several minutes to thoroughly mix the rolled feed and supplements.
IMPORTANT:
When transporting a load any distance, disengage the mill following the safety procedures,
then re-start the mixer allowing it to continue to run to eliminate any settling of feed in the tank that may
cause the Mixer to have a hard time restarting. Disengage the tractor PTO before turning corners to prevent
damage to the PTO driveline - Re-engage the PTO after turning the corner.
-21-
OPERATION
EMERGENCY SHUTDOWN
In an emergency or in case a foreign object enters the mill, stop mixer operation immediately by disengaging
the tractor PTO.