H&S 9117, Руководство оператора, Страница: 27 / 56

OPERATION
-25-
SUPPLEMENT HOPPER
Snubbers lock the lid on the Supplement Hopper into the closed
position. A bag guard is provided to prevent containers from being
accidentally drawn into the transfer auger. A flip-over bag breaker
allows easy opening of supplement bags.
NOTE:
Liquids, such as molasses, should not be poured into the
grinder-mixer as it will cause build-up within various parts of the mixer.
OPTIONAL REAR SUPPLEMENT HOPPER
A rear Supplement Hopper is available in addition to the standard
side Supplement Hopper.
SCREENS
Uniformity of grinding is a factor of mill speed, condition of the hammers,
and sharpness of the screen. The efficiency of the mill will also decrease if
the holes of the screen are badly worn. If grinding fineness is deteriorating,
the screen should be rotated to place the sharp holes edges against the
direction of the cylinder rotation or the screen should be replaced. The
Mixer can be fitted with numerous screens that are available with various
size holes to accommodate different material and grinding requirements.
A screen storage rack is provided on the left side of the mixer.
NOTE: If a screen is correctly installed, it should fit tight against the mill
throat plate and butt tightly against the mill frame hood sheet when the mill
screen cover is closed and securely latched.
The listing below are only suggested hole size recommendations for different materials:
Fine Grind
Small Grains: 1/8”, 3/16”
Medium Grind Small Grains: 3/16”, 1/4”, 5/16”
Coarse Grind Small Grains: 3/8”, 1/2”, 5/8”
Fine Grind Shelled Corn: 1/8”, 3/16”, 1/4”, 5/16”
Medium Grind Shelled Corn: 3/8”, 1/2”, 5/8”
Coarse Grind Shelled Corn: 3/4”, 1”
Fine Grind Ear Corn: 1/4”, 5/16”, 3/8”
Medium Grind Ear Corn: 1/2”, 5/8”
Coarse Grind Ear Corn: 3/4”, 1”, 1-1/4’ , 1-1/2”