
Hampton®H15E-11DirectVentFreestandingGasStove
| 41
installation
OPTIONAL
WALL THERMOSTAT
Awallthermostatmaybeinstalledifdesired.Con-
nectthewiresasperthewiringdiagrams.
Note: Preferable if the thermostat is installed
on an interior wall.
Hampton
®
offersanoptionalprogrammablethermo-
statbutany250-750millivoltratednon-anticipator
typethermostatthatisCSA,ULCorULapproved
maybeused.
FINAL CHECK
Before leaving this unit with the customer, the
installer must ensure that the appliance is firing
correctly.Thisincludes:
1) Clockingtheappliancetoensurethecorrect
firingrate(ratenotedonlabel)at15minutes.
2) Ifrequired,adjustingtheprimaryairtoensure
thattheflamedoesnotcarbon.Firstallowthe
unittoburnfor15min.tostabilize.
3) Checkforproperdraft.
CAUTION
Any alteration to the product that causes
soo-ting or carboning that results in damage
to the exterior facia is not the responsibility
of the manufacturer.
CAUTION
Do not wire millivolt
wall thermostat wires
to 120V wire.
BACK UP BATTERY
In the event of a power outage the unit may be
operatedbyabackupbatterysystem.
1.Opentheright(whenfacingfrontofappliance)
accesspanelbyremoving1screw.
2.Install4AAbatteriesintothebatteryholder.
Note: Removethebatterieswhennormalopera-
tionisresumedastheheatwilldrainthebat-
terypowerrapidly.
REMOTE/IFC (INTEGRATED FIRE-
PLACE CONTROL)
CODING/PAIRING
TocodetheIFCtothehandheldremote,follow
theprocedurebelow.
1.Openthehebottomfrontaccesspaneloftheunit.
NOTE:EnsurethatthemainON/OFFswitchisin
theONposition.(Unitwillnotfunction,unlessitis
inONposition)
2.Plug in 120 volt power cord into a grounded
receptacle
orinstall4AAbatteriesintobattery
packandplugintobatteryterminalslocatednear
thegasvalve.Donotuseboth.Onlyusethe4
AAbatteriesif120voltpowerisnotavailable.
3.Press down the black button on the left side
panel(whenfacingunit)until3beepsareheard.
MANUAL OPERATION
(NO REMOTE)
Todivorcetheremotetransmitter,presstheblack
button until it beeps 3 times, within 10 seconds
presstheblackbuttonagainuntilabeepisheard.
Afterdivorcingtheremotetransmitter,theON/OFF
switchatthefrontoftheunitwillcontroltheunit.
Reset
button
5.Press the ON/OFF button on the hand held
remotetocodetheremotetotheIFC–after4
beepsareheard–handheldispairedwithIFC.
4.Install3AAAbatteriesintohandheldremote.