
16
|
Hampton®H15E-11DirectVentFreestandingGasStove
installation
LOCATING YOUR
GAS STOVE
Whenselectingalocationforyourstove,ensure
that the clearances listed above are met as well
asensuringthatthereisadequateaccessibilityfor
servicingandproperoperation.
MANUFACTURED MOBILE HOME
ADDITIONAL REQUIREMENTS
1) Ensurethatstructuralmembersarenotcutor
weakenedduringinstallation.
2) Ensurepropergroundingusingthe#8ground
lugprovided.
3) Appliancemustbeanchoredtothefloorwith
thesuppliedanchoringmethods.
COMBUSTION AND
VENTILATION AIR
The combustion air from this appliance is drawn
from outside the building through the outer flue.
Extra provision for combustion air inside the
room is not required.
A) CrossCorner
B) RoomDivider
C) Island
D) FlatonWall
E) FlatonWallCorner
F) FlushwithWall/Alcove
ForVentTerminationrequirements,seethe"Exterior
VentTerminalLocations"section.
*12'max.onlyifverticalheightisachieved.
CLEARANCES TO COMBUSTIBLES
The clearances listed are MINIMUM distances.
Measuretheclearancetoboththeapplianceand
thechimneyconnector.
The farthest distance is
correct if the two clearances do not coincide.
Forexample,iftheapplianceissetasindicatedin
oneofthefiguresbuttheconnectoristooclose,
movethestoveuntilthecorrectclearancetothe
connectorisobtained.
This appliance may be installed only with the
clearances as shown in the situations pictured.
Do not combine clearances from one type of
installation with another in order to achieve
closer clearances.
Thisunitcanbeinstalledonasolidcombustible
surface like a wood floor. This unit can also be
installeddirectlyoncarpetingorvinyl.
Use the minimum clearances shown in the dia-
gramsbelow:
H15E-NG11 & H15E-LP11Clearances
A LeftSideWalltoUnit
*
6"/150mm
*BBackWalltoUnit
0"/0mm
C VerticalVentPipetoBackWall
2"/50mm
E UnitCornertoWall
2" /50mm
UnitToptoAlcoveCeiling24" /610mm
Minimumceilingheightis24"/610mmfromtop
ofunit.
*IMPORTANT
Itisrecommendedthatunitismovedawayfrom
thewall,ifinstallingthebloweroption,sothefan
canbeeasilyinstalledand/orserviced.
Lift light assy bracket off bolts to install bulb
Remove one screw in location shown
4.Installbulb.
Note:Oilsfromhandswillshortenthelifeofthebulbs,
donothandlebulbswithbarehands.
5.Reversesteps.
2.Loosenboltssecuringcastfront–slidelightas-
semblybracketupwardtorelease.Seebelow.
3.Removeone(1)screwtoremovebulbhousing.
Seebelow.
ACCENT LIGHT BULB
INSTALL
Accent light bulb is packed in the manual pack.
1.Liftoffcasttopandplaceonasoftsurface.
Remove 1 screw
Loosen bolt
Loosen bolt