Hamilton CTK Скачать руководство пользователя страница 52

Страница: 52 / 135

Item ID:

This is if you want the code coupon good for a specific package. Using the pull down, you can

choose the package you want this code to only be used for.

Value:

This is if you want the code to give the same value across all packages

Description:

This is a text field for entering a description of the code discount.

Feedback:

This is for entering a message that is displayed to the customer after the code coupon has

been validated.

Once you have completed this page, click then click activate change

Repeat this process to add another code coupon.

Code Coupon:

This is where it will display all of the codes that are programmed in the machine.

Enable:

Turning ON will enable the code to be used at the machine. If the box id OFF, the code will be

disabled.

Default Value:

This is the value of the discount for this code coupon for all packages. If the Code Coupon

is only good for one specific wash package, leave the default value at $0.00. Example: $1.00 would be a

$1.00 discount off any wash package.

Item 1-8

: This is where you can specify a different value for each package with one code, or you can

make that code good for only one package. If you want to make the code good for one package, put the

value of the code under that package and then leave $0.00 amount under the remaining packages.

One code, with a different value for each package:

Document #101-0243

02/01/18

Содержание CTK








































































































































Результаты поиска

Содержание CTK

Отзывы:

Похожие инструкции для CTK

Бренды по названию

Популярные бренды

Hamilton CTK, Руководство по программированию

Результаты поиска

Содержание CTK

Отзывы:

Похожие инструкции для CTK

Бренды по названию

Популярные бренды