hager tebis TX100, Руководство пользователя

Страница: 22 / 25

TE331 22 6T 8722-02a
The consumption indicator requires mains power and a power supply to the KNX bus to operate.
Mains power fault: After 60 s, the energy, current, voltage and power data returns to 0 and is still sent on the bus according to the
defined period. When the mains power is restored, the data is sent normally again.
KNX bus fault or mains + KNX bus fault: The consumption indicator is deemed to be out of service. No data is sent. When the bus
connection and power supply are restored, the system takes a few minutes to restart and send data normally.
Remark: To address or configure the product, only the KNX bus requires power.
➜
Single-phase
➜
Three-phase
10.3 Current outage and return
10.4 Connection of the toroids according to the number of phases