hager tebis TX100, Руководство пользователя

Страница: 15 / 25

TE331 15 6T 8722-02a
■
Objects appearing for the TE331
The TX100 does not allow links to be created for the Voltage , Current et Choice of tariff channel objects. Programming by ETS
is required for this.
The mode +Info can be accessed in the Prog and Visu modes of the TX100.
The +Info mode is activated for all products in the installation in progress until the mode is deactivated.
This mode enables access to the status indication of an output and to special functions. The status indication sends the current
status over the network each time the status changes.
The +Info mode allows the status indication to be linked from an output to a viewing product: Area controller, LED output, etc.
The status indication sends the current status over the network each time the status changes.
The status indication is represented by the symbol .
The status indication adds itself to the list of inputs on the left of the TX100 screen with the same number as the output.
Designation TX100 ETS objects designation Description
OutTemp Temperature Temperature - Emission Used to send the temperature.
Tariff Tariff Metering - Current tariff
Used to index the partial and total energy
values.
Power Power Metering - Power Used to display the instantaneous power.
ETotal Total energy Metering - Total energy
Used to display the total energy
consumed since the system was started
up.
Timer Timer Metering - Dynamic mode activation
Used to refresh the metering data more
frequently.
Reset Partial meter Reset Partial meter Reset - Control Used for Partial meter Reset.
Epartial Partial energy Metering - Partial energy
Used to display the partial energy
consumed since the last reset.
Tariff Tariff Current tariff - Emission
Used to send the current tariff received
by the tele-info of the subscriber's meter.
TariffNext Coming tariff Coming tariff - Emission
Used to send the coming tariff received
by the tele-info of the subscriber's meter.
8.4 +info mode