hager tebis TX100, Руководство пользователя

Страница: 11 / 25

TE331 11 6T 8722-02a
■
Energy saving function
■
Energy management function
Note:
Group addresses are automatically allocated for:
• The Power, Total energy, Partial energy, Dynamic mode and Reset objects for the Metering function (Valid for the 7
channels),
• The Current tariff and Coming tariff for the Tariff function.
Group addresses are not automatically allocated for:
• The Tariff object for the Metering function (Valid for the 4 channels),
• The Ext. temp object for the Temperature function.
The information concerning these objects may come from the device or the bus.
3. TE331 inputs and outputs
Inputs Numbering Outputs
1 temperature channel +info
Inputs Numbering Outputs
7 metering channels (3 strength of current transformers
+ the tele-info link + ad other + three-phase)
1 tariff information channel
+info
4. Product installation
Steps to follow Actions on TX100
Programming the product Press the key to start memorisation.
Automatic allocation of group addresses
• Go to Menu / Installation management / domovea,
• Confirm "Addition" in domovea,
• Wait for downloading to complete.
Rem: Only version 2.7.58 of TX100 and higher.
Manual allocation of group addresses for the Metering object
tariff
Activate expert mode for display
• Go to Menu / Expert / Standard,
• Activate the Expert mode,
• Go to Programming Mode,
• Select the metering channel,
• Go to expert mode to display the objects,
• Go to Tariff,
• Click on Addition,
• Enter the group address and confirm.
Optional step:
Display of the group addresses
• Go to Programming Mode,
• Go to expert mode to recover the group addresses.
Saving the project on a USB key to recover the group
addresses on domovea
• Go to Menu / Project management / Backup,
• Inser the USB key,
• Select the name of the file and launch backup.
Rem: see chapter 9.2 for programming under demovea.