hager tebis TX100, Руководство пользователя

Страница: 24 / 25

TE331 24 6T 8722-02a
■
Restore Factory Configuration function
This function enables the device to be returned to its initial configuration (configuration when it came out of the factory).
After a factory reset, the product can be reconfigured or reused in a new installation..
This function is accessible via the TX100's Device Management / Reset menu.
There are 2 different cases:
• The device belongs to the installation: it appears in the Reset menu's list of devices that can be reset to Factory
configuration. Select the device from the list, press and confirm deletion,
• The device does not belong to the installation:
• On TE331 device
•
Press on the physical addressing push button to detect the device,
• On the TX100
•
Select Install. product outside of system from Reset menu,
• Press ,
• Select TP,
• Press .
After the operation the TX100 emits a beep and the 3 LED's on the product go out.
After a device reset, the installation must be learnt again in order to relocate the devices reset to Factory configuration.
■
Characteristics
■
Bus presence test
To check the presence of the bus, remove the front panel and press the physical addressing push button located on the product
BCU.
Indicator ON = Bus presence
Important = Press the button again to exit this mode
11. Other functions
Max. number of group addresses 254
Max. number of links 255