HAEMMERLIN MAXIAL PREMIUM, Инструкция по эксплуатации

Страница: 41 / 88

41
TIPPING SKIP
The tipping skip is used to transport and dump concrete, sand and rubble of all kinds manually up and
down.
It has the particularity of being designed for tipping which allows the skip to remain in the same position,
regardless of the slope of the ladder including during the passage of the knee joint.
When the skip is loaded, it must be empty.
When the skip is empty, it should always be secured with the lock.
Care must always be taken to ensure that the material being transported cannot fall.
Tipping up and down is done manually.
Installation of tipping skip:
- Attach the tipping subframe to the trolley so that the hooks of the tipping subframe hook onto the
upper crossmember of the trolley (1), then secure the assembly with the 2 braces, 4 screws and 4
bolts. Before tightening the bolts, make sure that the braces are positioned under the trolley frame.
- Lock the tipping subframe to the trolley using the clip pins (2).
- Before hooking the skip, make sure the lock is in the open position (see detailed image D).
- Then hook the tray onto the tipping frame (3) by inserting the tipping shafts of the skip into the
compartments provided on the tipping frame.
- When the skip is hooked onto the tipping frame, fit the quick bolt (4) (see detailed image E).
- Tighten the quick bolt properly so that the skip is securely attached and cannot fall off (see detailed
image F).
1
3
2
2