HAEMMERLIN MAXIAL PREMIUM, Инструкция по эксплуатации

Страница: 12 / 88

12
Volume of the platform, vertical with front panel
0.110m3 0.110m3 0.138m3
Base ladder 2m with hinged shoes
Standard profile Standard profile Heavy duty profile
Ladder 0.5 m
Standard profile Standard profile Heavy duty profile
Ladder 1 m
Standard profile Standard profile Heavy duty profile
Ladder 2 m
Standard profile Standard profile Heavy duty profile
Knee joint (1.20m)
Pre-welded 30 to
60°
Pre-welded 30 to
60°
Double ply 0 to 60°
Headboard (0.30m)
Yes Yes Yes
Fast assembly with quick bolts
Yes Yes Yes
The hoisting, shoring and anchoring accessories and additional elements listed in the
catalogue are all optional.
In order to improve its products, HAEMMERLIN reserves the right to make changes to the
materials at any time.
PRECAUTIONS TO BE TAKEN DURING INSTALLATION
-
The assembly area must be marked out and the equipment must be stored properly without
obstructing the movement of third parties and allowing the smooth running of the site.
- Set up the workstation so that the operator has full visibility of the entire trajectory of the moving
parts. The work area must be well lit to ensure a good view of the entire path of the load to be
hoisted.
- Make sure that it is not possible to be within five metres of a live power line. Take into account the
length of materials handled and hoisted.
- Make sure that the ground can support the load at the support point of the hoist when it is at
maximum load. The anchoring must be stable, solid and durable.
-
The hoist shall be installed so that, during ascent or descent, the moving part of the hoist cannot
collide with other moving bodies or with the building or structure against which it is installed.
- Verify that the length of the lifting cable is greater than twice the height of the high unloading
point and that once the machine is installed with the mobile equipment in the lowered
position, there are at least 3 turns of cable left wound around the winch drum.
Verify the
general condition and the winding of the lifting cable around the drum. It must always be perfectly
wound around the drum to avoid deteriorating. It must be replaced if it shows tears or crushing. It is
strictly forbidden to repair a lifting cable using couplers or cable ties! See the chapter on cable
maintenance on pages 93-94.
GROUND PRESSURE UNDER MAXIMUM LOAD
HEIGHT OF THE
LADDER
MAXIAL
PREMIUM EXCELLIUM EXPERT
H10m 387daN 440daN 500daN
H15m 413daN 466daN 529daN
H20m 464daN 516daN 586daN
H30m 567daN 643daN
H40m 700daN
P