Seite 23 von 62
Brushless DC Controller HST-350
Orginalbetriebsanleitung
Rev1.3
Montage und Inbetriebnahme
• Anhand des Fortschrittsbalkens können Sie den Verlauf beobachten
• Den gleichen Schritt wiederholen Sie nun für das Device „35“
• Der Bootloader quittiert mit der Meldung „Complete“
Schreiben eines neuen EEPROMs
Immer wenn Sie einen Controller mit einer neuen FW-Version beschreiben, müs-
sen Sie danach unbedingt ein neues EEPROM (Electrically Erasable Programm-
able Read-Only Memory) einlesen.
Im EEPROM sind alle zum Betrieb des Antriebs erforderlichen Parameter hinter-
legt.
Gehen Sie dazu wir folgt vor:
1.
Wechseln Sie ins Register „EEPROM“ am rechten Rand des Bootloaders
2.
Öffnen Sie den Pfad zum neuen EEPROM
3.
Wählen Sie ein passendes EEPROM aus und bestätigen Sie; die Daten
werden sofort zum Controller übertragen
4.
Der Controller quittiert mit der Meldung „read EEPROM S4 ok“