Seite 10 von 62
Brushless DC Controller HST-350
Orginalbetriebsanleitung
Rev1.3
Montage und Inbetriebnahme
4.
Montage und Inbetriebnahme
4.1 Anschluss Phasen- und Akkukabel
Für die Verkabelung zwischen Regler und Motor, sowie Regler und Akku ist selbst zu sorgen.
Achten Sie auf die passenden Querschnitte zur Leistung.
Es ist vorgesehen die Phasen- und Akkukabel mit M10-Linsenkopfschrauben (Anzugsdrehmoment
17Nm) zu befestigen.
Bringen Sie dazu passende Ring- oder Rohrkabelschuhe an den Kabeln an.
4.2 Belegung Sensorschnittstelle
35 pole socket ESC of HST-350
Pin
Signal description
Signal
SW/HW
VDC
Function
Description
Pin / Colour
1
signal ground of T-
sensor (pin3)
GND
0
GND
T-Sensor
10 pole
10 / black
2
Ignition Key / Klemme
15
ON/OFF
battery:
32.0 – 58.8
input (digital)
V_Bat
switch
(or optional:
Display)
3
motor temperature of
coil U
T_Mot-U
15
input (analog) 10 pole
5 / white
4
motor temperature of
coil V
T_Mot-V
15
input (analog)
5
motor temperature of
coil W
T_Mot-W
15
input (analog)
6
Signal Ground
GND
0
GND
7
accumulator tempe-
rature
T_Bat-1
5
input (analog) For use with
KTY83 sensor