Seite 26 von 62
Brushless DC Controller HST-350
Orginalbetriebsanleitung
Rev1.3
Montage und Inbetriebnahme
Aktivieren eines Sensors: Die unter „Script“ erwähnte Zahl muss im Feld „Value“ eingetragen wer-
den, hier am Beispiel des Temperatursensors des Akkus:
Die Register Advanced, TECH und GEN können nur in Zusammenarbeit mit der entsprechenden
Projektleitung bei Hacker angepasst werden. Nachfolgend finden Sie die Einstellung des Basic
Menü, welches Sie frei anpassen können. Die Werte sind selbsterklärend. Da die Software des
Controllers einen ständigen Erweiterungsprozess unterliegt, kann die Darstellung von der tatsäch-
lichen Version abweichen.
Nachdem Sie das EEPROM erfolgreich beschrieben und parametriert haben, können Sie nun
beginnen, das System in Betrieb zu nehmen.
Schließen Sie dazu bitte den Bootloader, damit das CAN Interface für den nächsten Schritt frei
wird.
Dazu vor dem Herausziehen des CAN-Adapters oben/links den Button [Release] drücken.
Nun muss der Regler neu gestartet werden, trennen Sie ihn dazu ca. 10 Sekunden von der Span-
nungsversorgung und schließen Sie ihn dann wieder an.
Für weitere Unterstützung wenden Sie sich an
HINWEIS
Ändern von Parametern
Das Ändern der Parameter erfordert ein fundiertes Fachwissen. Falsche Parameter
können zur Zerstörung des Antriebs führen und Folgeschäden verursachen.