Habasit PMR-07 Скачать руководство пользователя страница 59

Страница: 59 / 68

Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545

Regulating Unit PMR-07

Author:

A.T. / KM

PMC-07

Edition: 04/2006

Page

H-2

Replaces: 10/2005

H.1

PURPOSE OF THE DEVICE

The PMC-07 cooling unit works only in combination with the PMR-07 regulation unit and
enables the flow of cooling air and liquid (water) to the hot pressing device to be controlled.

The cooling unit PMC-07 has been developed exclusively for the applications described herein.
No other or inappropriate applications are permitted.

ATTENTION

ANY USE OF THE COOLING UNIT OTHER THAN FOR WHICH IT WAS DESIGNED MAY BE

IMPROPER USE AND RESULT IN NOT BEING SAFE FROM THE POINTS OF VIEW OF THE

OPERATOR, MAINTENANCE WORKER AND OF THE COOLING UNIT ITSELF.

HABASIT SHALL NOT BE HELD LIABLE FOR THE CONSEQUENCES OF ANY BREACHES OF

THESE RULES.

Regulating Unit PMR-07

Содержание PMR-07





































































Результаты поиска

Содержание PMR-07

Отзывы:

Habasit PMR-07, Общее руководство по использованию и техническому обслуживанию, Страница: 59 / 68

Результаты поиска

Содержание PMR-07

Отзывы: