Habasit PMR-07 Скачать руководство пользователя страница 31

Страница: 31 / 68

Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545

Regulating Unit PMR-07

Author:

A.T. / KM

INSTALLATION

Edition: 04/2006

Page

C-7

Replaces: 10/2005

C.5

STORAGE

IMPORTANT

The regulating unit must be stored in a dry room free from seepage of liquids.

NOTE

Never, on any account, store the regulating unit out of doors! As a general rule, observe the

following environmental conditions.

ABLE

TORAGE CONDITIONS

ENVIRONMENTAL CONDITIONS

FOR STORAGE

Min/Max ambient

temperature of storage

In the range of +5 °C to +40 °C

Relative humidity of

place of storage

In the range of 50% to 70%

If the regulating unit, its accessories and spares have to remain in storage for a prolonged
period, they must be protected from dust and damp.

We recommend the following:

Clean the regulating unit in general.

Apply PROTECTIVE SILICONE OIL to

-painted or

-treated parts.

Cover the regulating unit with a sheet to protect it from dust.

Before being oiled or greased for good preservation, some parts can, if necessary, be cleaned
with a specific, rust-proofing detergent.

Regulating Unit PMR-07

Содержание PMR-07





































































Результаты поиска

Содержание PMR-07

Отзывы:

Habasit PMR-07, Общее руководство по использованию и техническому обслуживанию, Страница: 31 / 68

Результаты поиска

Содержание PMR-07

Отзывы: