Habasit PMR-07 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 68

Habasit PMR-07 Скачать руководство пользователя страница 17

Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545

Regulating Unit PMR-07

Author:

A.T. / KM

REGULATIONS AND GENERAL WARNING NOTES

Edition: 04/2006

Page

A-11

Replaces: 10/2005

A.8

QUALIFICATIONS OF PERSONNEL

Each task must be assigned to a person trained in the work to be carried out and trained in
correct usage as well as fully aware of any remaining risks and dangers in that work. Personnel
must not carry out work outside their area of competence, knowledge and responsibility.

T

ABLE

4

-

Q

UALIFICATIONS

FIRST LEVEL MACHINE CONTROL OPERATOR

Indicates non qualified personnel i.e. without specific competencies and able
only to carry out simple tasks, including in practice running the machine with
the use of the controls on the push-button panel and loading and unloading
materials used during production. Furthermore, this operator can work with
the machine while the machine’s protective devices are enabled, to carry out
simple, ordinary jobs for adjusting, starting or re-starting production following
enforced downtime.

MECHANICAL MAINTENANCE PERSON

A qualified technician able to run the machine under normal conditions, to
intervene on mechanical parts to make all adjustments as well as the
necessary mechanical maintenance and repair jobs, also with the protective
devices disabled.

ELECTRICAL MAINTENANCE PERSON

A qualified technician able to run the machine under normal conditions, and
also with the protective devices disabled; s/he is entrusted with all electrical
jobs involving adjustment, maintenance and repairs. This operator is able to
work while the interior of the cabinets and the connector blocks are
electrically live.

QUALIFIED TECHNICIAN

A person who is by training, experience, education and knowledge of
accident prevention regulations and procedures able to perceive and avoid
possible dangers and who is authorized by the plant's safety officer to carry
out all necessary mechanical and electrical intervention.

SPECIALIZED SUPERVISOR

An expert, specialized technician provided by the Manufacturer to carry out
complex operations in particular situations, installation, first start-up,
instruction of the Customer’s personnel, as well as overhauls of and
modifications to the machine.

Regulating Unit PMR-07

«
...
15
16
17
18
19
...
»

Содержание PMR-07





































































Отзывы:

Нет отзывов