Haas Bar Feeder, Руководство по установке

Страница: 7 / 13

6
For Lathes equipped with the 34-348xA,
34-348xC I/O PCB:
Connect these cables from the conduit to the I/O
PCB:
• Cable 200 to P62 [1]
• Cable BF Input to P59 [2]
• Cable 810 to P58 [3]
For Lathes equipped with the 34-349x
• Cable 200 to P62 [1]
• Cable BF Input to P59 [2]
7
For Lathes equipped with the 34-349x I/O PCB:

Note: Bar Feeders built after January 14, 2019
will have a Tool Changer PCB kit included in the
electrical kit.
• Install the TC PCB on the standoffs.
• Connect cable P/N 33-0413 from J1 [2]
on the TC PCB to P74 [3] on the I/O PCB.
• Connect cable P/N 33-0412 from P55A
[4] on the TC PCB to P55 [5] on the I/O
PCB.
• Connect cable P/N 33-0349 from P4 on
PSUP PCB to the P55 [7] on the TC PCB.
• Connect the bar feeder cable to P58 [6].
Haas Bar Feeder - Installation - NGC - AD0406
Page 7 of 13 pages