Haas Automation VF Series Скачать руководство пользователя

Страница: 49 / 127

January 2004

ZERO RET

URN

MODE

ZERO RET

Selects Zero Return mode to initialize and zero machine.

AUTO ALL AXES

This will position and initialize all axes to machine zero. The Z axis will position first, then X and Y axis, along

with any A and B auxiliary axes that are enabled up on the machine.

ORIGIN

Zeros out various displays and timers on control.

ZERO SINGL AXIS

This will position and initialize a single axis that you enter in the on the control with the letter, X, Y, Z, A or B

and then press ZERO SINGL AXIS to move the machine to zero on that specified axis.

HOME G28

Returns

all

axes to machine zero in rapid motion. This will not initialize machine on start up. Pressing HOME

G28 will cause all enabled axes to rapid return to machine zero. The Z axis will rapid first, then X and Y axes

along with any auxiliary A or B axes that are enabled.

Control Tip

- You can rapid a

single

axis home (X, Y, Z, A or B) separately after sending and initializing

machine to its zero location with Power Up Restart, by using the HOME G28 key. You enter the letter X, Y, Z,

A or B, then press HOME G28, and that axis alone will rapid home.

CAUTION

! There is no warning to alert you of

any possible collision! For example, if the Z axis is down near the part or fixture on the table, and then the X or Y

axis is sent home using HOME G28, a crash may result. Care must be exercised.

If the chosen axis is

disabled, the message DISABLED AXIS will be generated. (Any Mill Control ver. 9.49 and above; any Lathe

Control ver. 2.24 and above.)

CAUTION!

There is no warning message to alert the operator of any possible collision when

zeroing a single axis. For example, if the Z axis is down in amongst parts on the table when X or

Y is zeroed, a crash can result.

SECOND HOME This is an optional feature. When this button is pressed, the control will rapid all

axes (which have the 2ND HOME BTN bit =1) to the coordinates specified in

Work Offset G129. The sequence is as follows: First, assuming the X or Y axis

need to be moved, the Z axis is returned to zero, then the X and Y axes are moved

to their final positions, then the Z axis is moved to its final position. G129 Work

Offsets must be set to the desired values for this feature to work correctly. This

feature will work in any mode except DNC, just like the HOME G28 button.

Содержание VF Series
































































































































Результаты поиска

Содержание VF Series

Отзывы:

Похожие инструкции для VF Series

Бренды по названию

Популярные бренды

Haas Automation VF Series, Книга управления

Результаты поиска

Содержание VF Series

Отзывы:

Похожие инструкции для VF Series

Бренды по названию

Популярные бренды