Haas Automation VF Series, Книга управления

Страница: 22 / 127

15
January 2004
Example: The following code sequence demonstrates how the spigot could be commanded. Tool 2 using
coolant position 6 on offset H02 and position 5 on offset H22.
Setting 15 would need to be OFF to do this.
Tool Offset Display
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
COOLANT --------- LENGTH ---------- ------- DIAMETER -------
TOOL POSITION GEOMETERY WEAR GEOMETRY WEAR FLUTES
1 3 -12.3568 -0.0045 0.7500 -0.0025 6
2 6 -9.3612 -0.0125 0.5000 -0.0015 4
... ... ...... ....... ....... ....... ...
... ... ...... ....... ....... ....... ...
... ... ...... ....... ....... ....... ...
22 5 -9.3612 -0.0125 0.5000 -0.0015 4
Part Program
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
O00001 (Coolant positioning example)
T1 M06 (Tool 1)
G90 G54 G00 X0.5 Y-0.5 S1400 M03
G43 H01 Z1. M08 (Moves spigot to the H01 coolant offset register location)
.
.
.
T2 M06 (Tool 2)
G90 G54 G00 X0.5 Y-0.5 S900 M03
G43 H02 Z1. M08 (Moves spigot to the H02 coolant offset register location)
.
.
.
G43 H22 Z0.1 (Position to new location with a second offset H22)
(More than one offset number can be used for a tool if needed)
.
M30
Or you could just program in an M35 in place of the H22 line to position spigot up one position.