Haas Automation VF Series Скачать руководство пользователя

Страница: 33 / 127

January 2004

PARAM

ETER

DISPLAY

The

PARAMETER DISPLAY

can be selected at any time by pressing the PARAM DGNOS button.

Changes to parameters can be made when in any mode except when running a program. The CUR-

SOR

and

down

buttons move to different parameters and the PAGE UP and PAGE DOWN

buttons move through groups of parameters. Parameters 1, 15, 29, 43, and 57 are displayed as a single page

of discrete items. Selecting among the items is done with the CURSOR

left

and

right

buttons or by using the

handle. Parameters cannot be changed with the servos on. The EMERGENCY STOP button is to turn the

servos off.

For machines with the fifth axis option, the parameter display organization has been modified to accommodate

the extra axis parameters. Parameter numbers have remained the same as in a four-axis control. Additional

parameters have been added for the fifth axis.

The parameters have been reorganized so that logically-associated parameters are grouped together. These

logical groupings are placed together into contiguous screens called pages. The most commonly changed

parameters have been placed at the beginning of the page list.

Pressing the HOME key displays the first parameter page. Pressing the PAGE DOWN key will display the

next page of parameters. The END key displays the last parameter page. Pressing the PAGE UP key will

display the preceding pages of parameters. All other features on the parameters display have remained the

same. So, if you are unfamiliar with the new format of the parameters, you can still search by parameter

number. Enter the number of the parameter you want to see and press the

down

arrow key. The page

that the parameter is on will be displayed and the parameter being searched for will be highlighted.

Caution

: DO NOT CHANGE PARAMETERS unless you know exactly what needs to be changed and why, and

that you have made all the correct inquiries within your company and to Haas service personnel. If a parameter

is changed without proper assistance, you may void the warranty of machine.

GNOS

TICS

DISPLAY

The

DIAGNOSTICS DATA DISPLAY

can be selected at any time by pressing the PARAM DGNOS

button a second time. There are two pages of diagnostic data and the PAGE UP and PAGE DOWN

buttons are used to select between them. After this, the current run time and the number of tool

changes are displayed.

A five-axis control has additional diagnostic data to be aware of: The first page of diagnostic data shows two

discrete outputs that control the rotary axes brakes; they are labeled Brake 4th Axis and Brake 5th Axis.

The 4th axis is synonymous with the A axis, and the 5th axis is synonymous with the B axis. If the Air Brake

Parameter for the axis is set to 1, the HAAS control un-clamps the brake whenever motion is commanded to

the rotary axis and sets the brake back to its previous state as soon as the motion stops. The brake is

activated by a relay. The two discrete outputs show the state of the brake relays. If the output is high (1) the

brake is un-clamped. When machine is first powered up the brake will be clamped, so the output will be low

(0). When the brake is un-clamped the message A UNCLMP (4th Axis) or B UNCLMP (5th Axis) is displayed

in the message area near the bottom of the display.

The M11 and M13 codes command the brake to be un-clamped. When these codes are in effect, the axis

brake will remain un-clamped even after motion has stopped.

The second page of diagnostic data shows the status of inputs from the motor interface board.

PARAM

DGNOS

PARAM

DGNOS

Содержание VF Series
































































































































Результаты поиска

Содержание VF Series

Отзывы:

Похожие инструкции для VF Series

Бренды по названию

Популярные бренды

Haas Automation VF Series, Книга управления

Результаты поиска

Содержание VF Series

Отзывы:

Похожие инструкции для VF Series

Бренды по названию

Популярные бренды