Haas Automation VF Series Скачать руководство пользователя

Страница: 119 / 127

112

January 2004

Alarm History saved to RS-232 and Disk

- This is a new feature. From the alarms history screen, the user

can now save the alarm history (the last 100 alarms) to a floppy disk file by entering a file name and pressing

F2. Alternately, the alarm history can be sent to a PC using RS-232 by pressing SEND RS232. The output

from either method will contain a percent sign (%) on the first and last lines.

(Any Mill control ver. 10.22 and above; any Lathe control ver. 4.02 and above)

MESGS

Leaving Messages

- You can enter a message in the MESGS display for the next person, or for yourself. It

will be the first display shown when you power up the machine,

if there are no alarms

other than the usual 102

SERVOS OFF alarm. If the machine was powered down using

EMERGENCY STOP

, the MESGS display will

not show up when you turn the machine on again. Instead, the control will display the active alarm generated

by the emergency stop. In this case, you would have to press the

ALARM/MESGS

key to view a message.

EDIT

The Edit Display

- When you press

EDIT

, the first display you see is the Advanced Editor display. This

display has menus in the upper left that allow the user to access features of the Advanced Editor. The menus

are entered into by pressing

. Pressing the

PRGRM/CONVRS

key while in Edit will bring up and display the

program only, to edit. Pressing

PRGRM/CONVRS

a second time will bring up the Quick Code editor, and again

will display Visual Quick Code. Quick Code can also be accessed from the Advanced Editor within the F1:

HELP pull-down menu.

Advanced Editor Menus

- Pressing

in the Advanced Editor will activate the menus. The menu selections

are made with the jog handle, turning it either clockwise or counterclockwise, or with the cursor arrow keys

(

). Press the

WRITE/ENTER

key to activate the cursor-selected menu item.

Advanced Editor On-line Help

- In the Advanced Editor, after pressing

to access the menus, on-line

Help is displayed in the lower right corner of the screen. To scroll through the Help text, use the

PAGE UP

PAGE DOWN

HOME

, and

END

keys (remember, the cursor arrows move you through the menu items, not the

Help text). In addition, if the

key is pressed during the use of a menu option, the Help text is likewise

displayed. Pressing

again will exit the Help display.

(Any Mill Control ver. 9.32 and above; any Lathe Control ver. 2.16 and above.)

Advanced Editor Searching

- When the SEARCH menu FIND TEXT item is used and the text is found, the

next press of

to activate the menus will automatically select the FIND AGAIN option. Likewise, when the

SELECT TEXT function on the EDIT menu is used, the next activation of the menus will cause the COPY

SELECTED TEXT option to be highlighted.

Advanced Editor Block Editing

- In the 80 column Advanced Editor you can select a program block and

copy it to another location, move it to another location, or delete it. To start the block definition, press

to get

into the menus, use the jog handle or the cursor arrows to select to select the EDIT menu and the SELECT

TEXT menu item, then press

WRITE/ENTER

. Another way to begin text selection is to put the cursor on the

program line where you want the selection to begin and press

. In either case, once youve defined the

beginning, you then use the cursor arrows to go to the line where the selection should end, and press

WRITE/ENTER

. This will highlight the section you want to copy, move, or delete. Then, use the EDIT menu (or

EDIT

hot keys), to COPY SELECTED TEXT (or press

INSERT

to copy), MOVE SELECTED TEXT (or press

ALTER

to move), or DELETE SELECTED TEXT (or press

DELETE

) for the selected block.

Содержание VF Series
































































































































Результаты поиска

Содержание VF Series

Отзывы:

Похожие инструкции для VF Series

Бренды по названию

Популярные бренды

Haas Automation VF Series, Книга управления

Результаты поиска

Содержание VF Series

Отзывы:

Похожие инструкции для VF Series

Бренды по названию

Популярные бренды