Haas Automation VF Series, Книга управления

Страница: 38 / 127

31
January 2004
EXIT BG EDIT Must exit Background Edit mode to perform this function.
FILE NOT FOUND The file was not found.
FLPY NOT ENBLED Floppy disk drive has not been enabled by parameters.
FUNCTION LOCKED Function attempted is locked from settings.
GUARDED CODE Cannot remove Onnnnn at start of program.
INSUF DSK SPACE Insufficient disk space to save the selected file.
INVALID AXIS Selected axis is invalid.
INVALID NUMBER Number entered is invalid.
MACHINE LOCKED Front panel has been locked by Setting 6.
MACRO LOCKED Macros 9000 to 9099 are locked by Setting 120.
MEMORY FULL Memory space is full.
MEMORY LOCKED Memory locked by Setting 108.
NO DISK FOUND Cannot find the floppy disk drive.
NO DNC PROG YET Attempted to start program before it was completely received.
NO INPUT Cannot alter until something has been entered.
NO NAME ENTRY A file name has not been entered.
NO ZERO A Cannot run machine until search for zero is complete on A axis.
NO ZERO X Cannot run machine until search for zero is complete on X axis.
NO ZERO Y Cannot run machine until search for zero is complete on Y axis.
NO ZERO Z Cannot run machine until search for zero is complete on Z axis.
NOT AVAILABLE Function requested is not available at this time.
NOT IN DRYRUN The function requested applies to DRY RUN, but control is not presently in that mode.
NOT FOUND Item not found during search in editor.
MACHINE LOCKED Front panel has been locked by setting.
MACRO LOCKED Macros 9000 to 9099 are locked by setting.
MEMORY FULL Memory space is full.
MEMORY LOCKED Memory lock is set in settings.
NEW PROGRAM A new program may be entered.
NO DISK FOUND Cannot find the floppy disk drive.
NO DNC PROG YET Attempted to start program before it was completely received.
NO INPUT Cannot alter until something has been entered.
NO NAME ENTRY No file name has been entered.
NO PROG YET Cannot press Cycle Start until a program is received.
NO ZERO A Cannot run machine until search for zero is complete on A axis.
NO ZERO X Cannot run machine until search for zero is complete on X axis.
NO ZERO Y Cannot run machine until search for zero is complete on Y axis.
NO ZERO Z Cannot run machine until search for zero is complete on Z axis.
NOT AVAILABLE Function requested is not available at this time.
NOT FOUND Item not found during search in editor.
NOT IN DRYRUN The function requested applies to DRY RUN, but control is not presently
in that mode.
ONE BIT ONLY Only 0 or 1 is accepted to alter a parameter switch.
PLEASE WAIT Wait until spindle is stopped.
PRESS +a OR -a (a = X,Y or Z)
Jog key for another axis has been pressed.
PROG EXISTS Cannot rename to an existing program.
PROG NOT FOUND Requested program not in memory.
PROG READY Program has been received and is ready to run.
PROGRAM IN USE Program is already in use.
RANGE ERROR Data being entered is outside of the valid range.
RESET FIRST Must press RESET before performing this function.
RS-232 ABORT RS-232 was aborted by operator action.
RS-232 DONE RS-232 operation is complete.