Haag-Streit VISUTRON 900 Touch Скачать руководство пользователя страница 70

Страница: 70 / 88

Troubleshooting

Troubleshooting

Only those errors indicated on the display are directly important to the user and are listed below. In case

of support requests, please refer to the Error Log File (Settings - Service - Show Error Log File) where a

detailed listing of all errors, warnings, and status messages are located.

Error Source

Probable Cause

Solution

Refractor [PH:yy]

• Cable to refractor failure, damaged,

or loose.

• Incorrect initiation.

• Failure of refractor electronics.

• Turn the unit on and off.

• Check the cable to the refractor.

EMR-Port [Dxx.yy]

• Wrong unit driver.

• Wrong interface parameters.

• Connection cable failure, damaged,

or loose.

• Tap the Settings menu on the screen,

and open the Ports Settings screen.

• Set the correct unit driver and interface

parameters for Instrument 1 or 2.

• Check the connection cable.

Instrument 1 or 2 Port

[Dxx:yy]

• Wrong unit driver.

• Wrong interface parameters.

• Connection cable failure, damaged,

or loose.

• Tap the Settings menu on the screen,

and open the Ports Settings screen.

• Check the connection cable.

Projector [Pxx:yy]

• Projector not connected.

• Projector turned off.

• Wrong projector driver.

• Projector cable failure, damaged, or

loose.

• Connect the projector to the central

unit and turn on.

• Select a suitable projector driver.

• Setup the correct interface parameters

in the Ports Settings screen.

• Check the connection cable.

Base-Unit [BU:yy]

• Incorrect power supply.

• Failure of central unit.

• Check the power supply.

Application [MA:yy]

• Failure of software.

• Failure of Controller.

• Cable to central unit failure,

damaged, loose, or positioned near

an interfering source.

• Failure of power supply.

• Perform a software update.

• Check the cable to the central unit.

• Check the power supply.

Green LED on the

central unit not lit.

• Cable not connected.

• Switch set to OFF.

• Connect the cable.

• Set the switch to ON.

Error Source [identification code]; Necessary for all support requests.

Brief Description.

16243-101 Rev. G

Содержание VISUTRON 900 Touch

























































































Результаты поиска

Содержание VISUTRON 900 Touch

Отзывы:

Бренды по названию

Популярные бренды

Haag-Streit VISUTRON 900 Touch, Руководство пользователя

Результаты поиска

Содержание VISUTRON 900 Touch

Отзывы:

Бренды по названию

Популярные бренды