Haag-Streit VISUTRON 900 Touch Скачать руководство пользователя страница 2

Страница: 2 / 88

Reichert, Reichert Technologies, Phoroptor, and ClearChart are registered trademarks of Reichert, Inc.

LensChek and OptoChek are trademarks of Reichert, Inc.

Bluetooth is a registered trademark of Bluetooth SIG.

AMETEK is a registered trademark of AMETEK, Inc.

All other trademarks are property of their respective owners.

The information contained in this document was accurate at time of publication. Specifications subject to change without notice.

Reichert, Inc. reserves the right to make changes in the product described in this manual without notice and without incorporating those

changes in any products already sold.

ISO 13485 Certified – Reichert products are designed and manufactured under quality processes meeting ISO 13485 requirements.

Refer to IEC 60601-1 for system level information.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic,

mechanical, recording, or otherwise, without the prior written permission of Reichert, Inc.

Caution: Federal law restricts this device to sale by or on the order of a licensed practitioner. Rx only.

Содержание VISUTRON 900 Touch

























































































Результаты поиска

Содержание VISUTRON 900 Touch

Отзывы:

Бренды по названию

Популярные бренды

Haag-Streit VISUTRON 900 Touch, Руководство пользователя

Результаты поиска

Содержание VISUTRON 900 Touch

Отзывы:

Бренды по названию

Популярные бренды