Starting a Refraction From Previously Saved, Transferred, or Input Data
1. Tap the drop-down list in the center display area or press the
AR
or
LM
button on the keypad to select
the data to be used (
e.g.,
LM, AR). The data from the boxes are transferred to the active refraction
data field.
Note:
The data label reflects where the data came from (
e.g.,
LM, AR).
2. Adjust measurements from this starting point.
3. Once an adjustment is made, the center label changes to Subjective.
Running a Program
In the main screen, the programs created are displayed in the Run Program panel in the lower right cor-
ner of the screen.
1.
To start a program, tap the program number. The first step of the program automatically begins.
2. Press the
CONTROL KNOB
to advance to the next step after completing a step in the program.
3. Tap the pause icon at the bottom right of the screen to pause the program. The icon will change to a
play icon (green triangle). Tap the play icon to resume the program.
4. Tap the stop icon to stop and exit the program.
Pause
Current Step
Stop
Figure PE-07, Run Program Screen
Previous
Step
Next
Step
Performing an Exam
(continued)
45
16243-101 Rev. G
Содержание VISUTRON 900 Touch
Страница 1: ...VISUTRON 900 Touch User s Guide ...
Страница 85: ...Notes 85 16243 101 Rev G ...
Страница 86: ...Notes 86 16243 101 Rev G ...
Страница 87: ...Notes 87 16243 101 Rev G ...
