Haag-Streit VISUTRON 900 Touch Скачать руководство пользователя страница 16

Страница: 16 / 88

Connecting With Bluetooth Dongles

(continued)

Note:

The LED will blink red if the connection fails.

Note:

If the Bluetooth dongle was successfully paired, “Connected” will appear in the upper right

corner of the panel. Refer to Figure IS-18. If “Failed” appears, then press and hold the Bluetooth

dongle’s reset switch, using an appropriate object (e.g., paperclip) for approximately 2 seconds.

The reset switch is on the side of the Bluetooth dongle. Refer to Figure IS-17. The LED will

illuminate solid red. Repeat the directions starting with step 10.

13. Disconnect the power cord and pairing cable from the Bluetooth dongle.
14. Connect the Bluetooth dongle to the external device’s serial port using the appropriate serial cable

and/or adaptor using the corresponding cable, then power on using the power adaptor. The LED will

illuminate blue.

15. Once the connection has been established again, the LED

will remain green.

Note:

At this point the Central Unit and Bluetooth dongle

may be powered off and on in any order. The wireless

connection will be established automatically once both

devices are powered on.

Bluetooth Dongle LED Lights Description

Solid Red

Light

• No connection.
• Ready to be paired

Blinking Red

Light

• Pairing Failed
• Reset Dongle and try to pair again

Solid Blue

Light

• Connection In Progress.
• Do not disconnect dongle from Central Unit

Solid Green

Light

• Dongle successfully paired

Instrument Setup

(continued)

Figure IS-17, Reset the Dongle

Red

Light

Paperclip

Figure IS-18, Connected Status

16243-101 Rev. G

Содержание VISUTRON 900 Touch

























































































Результаты поиска

Содержание VISUTRON 900 Touch

Отзывы:

Бренды по названию

Популярные бренды

Haag-Streit VISUTRON 900 Touch, Руководство пользователя

Результаты поиска

Содержание VISUTRON 900 Touch

Отзывы:

Бренды по названию

Популярные бренды