Instrument Setup
(continued)
Programs
Custom refraction steps can be recorded in up to four different programs. Programs are run by tapping the
number of the program at the bottom right of the main screen.
Creating a Program
1. Tap
Programs
in the bottom bar of the Settings menu.
2. Tap the
Number
in the Program Selection panel to select the program to setup.
3. Tap the step or test to add to the program in the Mode panel.
4. Tap the
Eye
to run the test on in the Eye panel (if available).
(R = right, L = left, B = binocular)
5. Tap the Chart icon located below the Eye section on the screen (if available).
6.
Tap the chart, filter and size to use for that step.
Note:
The Sphere Adjust, Cyl Adjust, and Axis Adjust steps allows a specific chart to be selected. The
charts selected for the
Prism, Phoria, Vergence,
XCyl, and BB tests are
used for those tests.
7. Tap
Insert
in the menu bar
at the bottom of the screen.
Each refraction step or test
will appear in the Program
Listing panel.
8. Repeat the above process
to add tests or steps to the
program.
9. Tap
Save
to save any
changes made to programs.
10. Tap
Exit
to return to the main
screen.
Clearing a Program
1. Tap the number of the pro-
gram to be cleared in the
Program Selection panel.
2. Tap
Clear
in the menu bar at the bottom of the screen.
3. Tap
Save
on the menu bar at the bottom of the screen.
Figure IS-36 Programs
38
16243-101 Rev. G
Содержание VISUTRON 900 Touch
Страница 1: ...VISUTRON 900 Touch User s Guide ...
Страница 85: ...Notes 85 16243 101 Rev G ...
Страница 86: ...Notes 86 16243 101 Rev G ...
Страница 87: ...Notes 87 16243 101 Rev G ...
