46
stopbits
{
1
|
1.5
|
2
}
undo stopbits
Default
The stop bit is one.
Views
AUX user interface view
Default command level
2: System level
Parameters
1
: Uses one stop bit.
1.5
: Uses one and a half stop bits.
2
: Uses two stop bits.
Usage guidelines
The stop bits setting must be the identical for the user interfaces of the connecting ports on the device and
the target device for communication.
Examples
# Set the stop bits on the user interface AUX 0 to 1.5.
<Sysname> system-view
[Sysname] user-interface aux 0
[Sysname-ui-aux0] stopbits 1.5
Related commands
stopbit-error intolerance
telnet
Use
telnet
to Telnet to a remote host.
Syntax
telnet
remote-host
[
service-port
] [
vpn-instance
vpn-instance-name
] [
source
{
interface
interface-type
interface-number
|
ip
ip-address
} ]
Views
User view
Default command level
0: Visit level
Parameters
remote-host
: Specifies the IPv4 address or host name of the remote host, a case-insensitive string of 1 to
20 characters.
service-port
: Specifies the TCP port number of the Telnet service on the remote host. It ranges from 0 to
65535, with a default of 23.
