90
Default
The primary IP address of the output interface is used as the source IP address for outgoing TFTP packets.
Views
System view
Default command level
2: System level
Parameters
interface
interface-type interface-number
: Specifies a source interface for outgoing TFTP packets.
ip
source-ip-address
: Specifies a source IP address for outgoing TFTP packets. This IP address must be
one of the IP addresses configured on the device.
Usage guidelines
You can use the
tftp client source
command to specify a source IP address or source interface for the
TFTP packets sent by the device. If a source interface (typically a loopback interface) is specified, its
primary IP address is used as the source IP address for the TFTP packets. The source interface setting and
the source IP address setting overwrite each other.
IMPORTANT:
To avoid TFTP connection failures, when you specify a source interface for TFTP packets, make sure the
interface has been assigned a primary IP address.
The
tftp client source
command setting applies to all TFTP sessions. When you set up a TFTP session with
the
tftp
command, you can also specify a different source IP address for the TFTP session.
Examples
# Specify 2.2.2.2 as the source IP address for outgoing TFTP packets.
<Sysname> system-view
[Sysname] tftp client source ip 2.2.2.2
# Use the primary IP address of interface GigabitEthernet 1/0/1 as the source IP address for outgoing
TFTP packets.
<Sysname> system-view
[Sysname] tftp client source interface gigabitethernet 1/0/1
[Sysname]
Related commands
display tftp client configuration
tftp ipv6
Use
tftp ipv6
to download a specified file from a TFTP server or upload a specified local file to a TFTP
server in an IPv6 network.
Syntax
tftp ipv6
tftp-ipv6-server
[
-i
interface-type interface-number
] {
get
|
put
}
source-filename
[
destination-filename
] [
vpn-instance
vpn-instance-name
]
Views
User view
