57
FTP configuration commands
In R1808P12 and later versions, the device supports the FIPS mode that complies with NIST FIPS 140-2
requirements. Support for features, commands, and parameters might differ in FIPS mode and non-FIPS
mode. For more information about FIPS mode, see
Security Configuration Guide
.
FTP is not supported in FIPS mode.
FTP server configuration commands
display ftp-server
Use
display ftp-server
to display the FTP server configuration and status information.
Syntax
display ftp-server
[
|
{
begin
|
exclude
|
include
}
regular-expression
]
Views
Any view
Default command level
3: Manage level
Parameters
|
: Filters command output by specifying a regular expression. For more information about regular
expressions, see
Fundamentals Configuration Guide
.
begin
: Displays the first line that matches the specified regular expression and all lines that follow.
exclude
: Displays all lines that do not match the specified regular expression.
include
: Displays all lines that match the specified regular expression.
regular-expression
: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
After configuring FTP server parameters, you can verify them with this command.
Examples
# Display the FTP server configuration and status information.
<Sysname> display ftp-server
FTP server is running
Max user number: 1
User count: 1
Timeout value(in minute): 30
Put Method: fast
