117
undo snmp-agent trap enable ospf 100
Related commands
•
display saved-configuration
•
reset saved-configuration
•
save
display default-configuration
Use
display default-configuration
to display the factory defaults.
Syntax
display default-configuration
[
|
{
begin
|
exclude
|
include
}
regular-expression
]
Views
Any view
Default command level
2: System level
Parameters
|
: Filters command output by specifying a regular expression. For more information about regular
expressions, see
Fundamentals Configuration Guide
.
begin
: Displays the first line that matches the specified regular expression and all lines that follow.
exclude
: Displays all lines that do not match the specified regular expression.
include
: Displays all lines that match the specified regular expression.
regular-expression
: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
The device is shipped with some basic settings called "factory defaults." If you do not access the Boot
menu to select the
Skip Current System Configuration
option , the factory defaults make sure the device
can start up and run correctly when it has no startup configuration file or the startup configuration file is
corrupted.
Examples
# Display the factory defaults.
<Sysname> display default-configuration
#
domain default enable system
#
undo ip redirects
undo ip ttl-expires
undo ip unreachables
#
vlan 1
#
domain system
access-limit disable
state active