Operation Manual – PoE-PoE Profile
H3C S5600 Series Ethernet Switches
Chapter 2 PoE Profile Configuration
2-2
To do…
Use the command…
Remarks
Enable the PoE
feature on a port
poe enable
Required
Disabled by
default.
Configure PoE
mode for Ethernet
ports
poe mode
{
signal
|
spare
}
Optional
signal
by
default.
Configure the PoE
priority for Ethernet
ports
poe priority
{
critical
|
high
|
low
}
Optional
low
by default.
Configure
the
relevant
features in
PoE
profile
Configure the
maximum power for
Ethernet ports
poe max-power max-power
Optional
15,400 mW by
default.
Quit system view
quit
—
In system view
apply poe-profile
profile-name
interface
interface-type
interface-number
[
to
interface-type
interface-number
]
Enter
Ethernet
port
view
interface
interface-type
interface-number
Apply the
existing
PoE
profile to
the
specified
Ethernet
port
In
Ethernet
port
view
Apply
the
existing
PoE
profile to
the port
apply poe-profile
profile-name
Use either
approach.
Note the following during the configuration:
1) When
the
apply poe-profile
command is used to apply a PoE profile to a port,
some PoE features in the PoE profile can be applied successfully while some
cannot. PoE profiles are applied to S5600 series Ethernet switches according to
the following rules:
z
When the
apply poe-profile
command is used to apply a PoE profile to a port, the
PoE profile is applied successfully only if one PoE feature in the PoE profile is
applied properly. When the
display current-configuration
command is used for
query, it is displayed that the PoE profile is applied properly to the port.
z
If one or more features in the PoE profile are not applied properly on a port, the
switch will prompt explicitly which PoE features in the PoE profile are not applied
properly on which ports.