manualshive.com logo in svg

H3C H3C S5600 Series, Руководство по эксплуатации, Страница: 762 / 1278

Поделиться
Скачать
H3C H3C S5600 Series Скачать руководство пользователя страница 762

Operation Manual – DHCP 
H3C S5600 Series Ethernet Switches 

Chapter 2  DHCP Server Configuration

 

2-35 

to communicate with the server directly. The other is to deploy the DHCP server and 

DHCP clients in different network segments. In this case, IP address assigning is 

carried out through DHCP relay agent. Note that DHCP server configuration is the 

same in both scenarios. 

2.10.1  DHCP Server Configuration Example 

I. Network requirements 

z

 

The DHCP server (Switch A) assigns IP address to clients in subnet 10.1.1.0/24, 

which is subnetted into 10.1.1.0/25 and 10.1.1.128/25. 

z

 

The IP addresses of VLAN-interface 1 and VLAN-interface 2 on Switch A are 

10.1.1.1/25 and 10.1.1.129/25 respectively.  

z

 

In the address pool 10.1.1.0/25, the address lease duration is ten days and twelve 

hours, domain name suffix aabbcc.com, DNS server address 10.1.1.2, gateway 

10.1.1.126, and WINS server 10.1.1.4. 

z

 

In the address pool 10.1.1.128/25, the address lease duration is five days, domain 

name suffix aabbcc.com, DNS server address 10.1.1.2, and gateway address 

10.1.1.254, and there is no WINS server address. 

 

 

  Note: 

If you use the inheriting relation of parent and child address pools, make sure that the 

number of the assigned IP addresses does not exceed the number of the IP addresses 

in the child address pool; otherwise extra IP addresses will be obtained from the parent 

address pool, and the attributes (for example, gateway) also are based on the 

configuration of the parent address pool.  

For example, in the network to which VLAN-interface 1 is connected, if multiple clients 

apply for IP addresses, the child address pool 10.1.1.0/25 assigns IP addresses first. 

When the IP addresses in the child address pool have been assigned, if other clients 

need IP addresses, the IP addresses will be assigned from the parent address pool 

10.1.1.0/24 and the attributes will be based on the configuration of the parent address 

pool.  

For this example, the number of clients applying for IP addresses from VLAN-interface 

1 is recommended to be less than or equal to 122 and the number of clients applying for 

IP addresses from VLAN-interface 2 is recommended to be less than or equal to 124.  

 

Содержание H3C S5600 Series































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов