Operation Manual – AAA
H3C S5600 Series Ethernet Switches
Chapter 2 AAA Configuration
2-10
Caution:
z
The following characters are not allowed in the
user-name
string: /:*?<>. And you
cannot input more than one “@” in the string.
z
After the
local-user password-display-mode cipher-force
command is executed,
any password will be displayed in cipher mode even though you specify to display a
user password in plain text by using the
password
command.
z
If a username and password is required for user authentication (RADIUS
authentication as well as local authentication), the command level that a user can
access after login is determined by the privilege level of the user. For SSH users
using RSA shared key for authentication, the commands they can access are
determined by the levels set on their user interfaces.
z
If the configured authentication method is none or password authentication, the
command level that a user can access after login is determined by the level of the
user interface.
z
If the clients connected to a port have different authorized VLANs, only the first
client passing the MAC address authentication can be assigned with an authorized
VLAN. The switch will not assign authorized VLANs for subsequent users passing
MAC address authentication. In this case, you are recommended to connect only
one MAC address authentication user or multiple users with the same authorized
VLAN to a port.
z
For local
RADIUS
authentication to take effect, the VLAN assignment mode must
be set to
string
after you specify authorized VLANs for local users.
2.1.5 Cutting Down User Connections Forcibly
Follow these steps to cut down user connections forcibly:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Cut down user
connections forcibly
cut connection
{
all
|
access-type
{
dot1x
|
mac-authentication
} |
domain isp-name
|
interface
interface-type interface-number
|
ip
ip-address
|
mac mac-address
|
radius-scheme
radius-scheme-name
|
vlan
vlan-id
|
ucibindex ucib-index
|
user-name user-name
}
Required