Operation Manual – Login
H3C S5600 Series Ethernet Switches
Chapter 6 Logging In Through NMS
6-1
Chapter 6 Logging In Through NMS
Go to these sections for information you are interested in:
z
Introduction
z
Connection Establishment Using NMS
6.1 Introduction
You can also log in to a switch through a network management station (NMS), and then
configure and manage the switch through the agent module on the switch. Simple
network management protocol (SNMP) is applied between the NMS and the agent.
Refer to the
SNMP-RMON
part for related information.
To log in to a switch through an NMS, you need to perform related configuration on both
the NMS and the switch.
Table 6-1
Requirements for logging in to a switch through an NMS
Item
Requirement
The IP address of the VLAN interface of the switch is configured. The
route between the NMS and the switch is reachable. (Refer to the
IP
Address Configuration – IP Performance Configuration
and
Routing
Protocol
parts for related information.)
Switch
The basic SNMP functions are configured. (Refer to the
SNMP-RMON
part for related information.)
NMS
The NMS is properly configured. (Refer to the user manual of your
NMS for related information.)
6.2 Connection Establishment Using NMS
Switch
NMS
Network
Figure 6-1
Network diagram for logging in through an NMS