H3C H3C S5600 Series, Руководство по эксплуатации

Страница: 1182 / 1278

Operation Manual – HWPing
H3C S5600 Series Ethernet Switches
Chapter 1 HWPing Configuration
1-11
To do… Use the command… Remarks
Configure the type of
HTTP operation http-operation { get |
post }
Optional
By default, the type of
HTTP operation is
get ,
that is, the HTTP
operation will get data
from the HTTP server.
Configure the HTTP
operation string and
version in an HTTP test
http-string string version
Required
By default, HTTP
operation string and
version are not
configured.
Start the test test-enable Required
Display test results
display hwping results
[ admin-name
operation-tag ]
Required
You can execute the
command in any view.
5) Configuring jitter test on HWPing client
Follow these steps to configure jitter test on HWPing client:
To do… Use the command… Remarks
Enter system view
system-view
—
Enable the HWPing client
function
hwping-agent enable
Required
By default, the HWPing
client function is disabled.
Create a HWPing test
group and enter its view
hwping
administrator-name
operation-tag
Required
By default, no test group
is configured.
Configure the test type test-type jitter
Required
By default, the test type is
ICMP.
Configure the destination
IP address
destination-ip ip-address
Required
The destination address
must be the IP address of
a UDP listening service on
the HWPing server.
By default, no destination
address is configured.